« 1 2 3 4 »
×

Sepi Deri

User Manual

Leather stamps are precision machined on brass parts using CNC and CAD/CAM technology. Applying excessive force to stamps, dropping them to the ground and handling them will damage the products.

1. Vegetable (raw) leather to be applied * It should be and it's surfaces should be wetted.** Applications made on dry surfaces will damage your leather and stamps.

* ( Vegetable - Raw ) It is recommended that the thickness of the leather be at least 2 mm and above.

** According to the Wetted Leather Thickness and Surface Structure, Stamps Must Form a Soft Surface to Form a Pattern Easily (Approximately 1-1.5 mm Wet is Recommended)

2. Wet leather should be placed on a hard surface. (marble etc.) Hard surfaces will help you get clearer results.

3. The stamp should be placed on the leather at a right angle and held tightly so that it does not slip. And they should be hit with a hammer and attention should be paid to the right, left and indentations of the stamps.

(Recommended to use a plastic or wooden hammer)

Whatsapp Tel: +90 532 650 86 87

Email: sonat@sepideri.com


Contact

Please fill out the form below to contact us. Do not hesitate, we are very happy to meet new people :)